18 KGCT 907.2E
If the sensor of a rear cooking zone
is touched when the cooking area
is retracted, the symbol „ “ ap-
pears in the display and an acou-
stic signal is emitted.
The automatic boost
function
All cooking zones are equipped with an automatic boost function. Maximum
power is used for the boost. The time period of the boost depends on the
selected cooking setting. After the elapsed time the cooking zone automatically
switches back to the selected cooking setting.
F
The automatic cooking function will be deactivated if the pan-detection
function is activated and the pan is taken off the cooking zone. The au-
tomatic cooking function will continue to operate once the pan has been
put back onto the cooking zone.
When selecting the respective coo-
king setting by pressing the minus-
sensor, the boost function swit-
ches on automatically.
During automatic operation a "A"
lights up in the display alternately
with the selected cooking setting.
When selecting the required coo-
king setting by pressing the plus-
sensor, it is necessary to press the
plus-sensor again after reaching
cooking setting 9 if the automatic
boost function is to be activated.
Select the required cooking set-
ting.
“A” lights up in the display alterna-
tely with the selected cooking set-
ting.
Cooking zone heating indicator
As long as the cooking zone is still
hot, an “H” will appear in the dis-
play when the cooking zone has
been switched off.
Dual-circuit cooking zones
Usually the cooking zone with the smaller diameter is being heated.
Switch on the outer cooking zone circuit for bigger sauce pans.
Press the cooking zone symbol
next to the plus/minus sensor.
The light on the left below the
symbol for the dual-circuit-cooking
zone indicates that the cooking
zone has been activated.
Pressing the cooking zone symbol
once again deactivates the dual
circuit cooking zone.
The grill area
The setting of the grill area you want can be selected with the plus- or the
minus-sensor.
Preheat the grill area for about 5 minutes at setting 9. Grill the food on each
side at setting 9 for 1-2 minutes, then turn down and finish the grilling pro-
cess.
The grill area can also be used as an area for keeping food warm at setting1.
In this case do not apply oil to the grill area!
The pan recognition function
All cooking zones have a saucepan sensor. The dual-circuit zone is also able
to detect the saucepan size.
F
The pan-detection function detects all pans made of metal.
The pan-detection function must be deactivated in order to use cooking
equipment made of glass or ceramics.
If a suitable pan is put onto the
cooking zone, “U” is indicated by
the display.
2 mal
or
