Filter
Top Products
Pag. 22
QUICK FUNCTIONS
To enter, keep pressed the button “espresso short” at the switching-on.
On display you will see “QUICK MENU ”
Pushing the relative button, you will execute these following functions:
Button Function
1 boiler refilling: some water will be supplied to fill up the
hydraulic system and the boiler.
2 boiler temperature: you can see the actual temperature of
the boiler
3 total counter: the display will show the total counter of
the machine for 3 seconds. It is not possible to reset this
counter.
4 exit of “quick menu”
5 grounds counter & filter counter reset: the coffee
grounds counter is reset to the value programmed on
the “level 2 menu”. The message “empty grounds !”
will disappear and the machine will continue to
work.
the filter counter is reset to the value programmed in
“level 2” menu. After that, the symbol “*” will dis-
appear.
6 free mode working: set the machine in “free mode” work-
ing. After 1 minute of inactivity the machine comes
back in regular working.
7 espresso group motor’s test: you can test the es-
presso group movement. Pushing the button 7, you
will supply the motor, while keeping pressed it, the
motor will move to the next position, “supply posi-
tion” or “normal position”.
8 Decounter 1 & 2 preset: the decounters 1&2 are set
to the value set in “level 2” menu.
Pag. 3
GRINDER
The quantity of ground coffee is adjustable through a screw (2); screwing it the
quantity decreases, while unscrewing it, the quantity increases..
To adjust the degree of grinding, after having pushed the lock (6), act on the
grind-stone holder (1), clockwise to have a finer grinding, while in counterclock-
wise to obtain a bigger grinding.
Make sure that the lock comes back in the hole of block of the grind-stone holder,
before starting the grinder
.