Filter
Top Products
Pag. 20
It is possible to eliminate, to modify or to insert movements or to change its regu-
lations where possible, for example the dosing of the products.
· to move the selection cursor movement use “up” and “down”
· to insert a new movement in the selected position press" +"
· to eliminate the selected movement press “-”
· to modify the selected movement press “back”
· to modify the regulations (ex: dosing) press E
To modify the name of the drink use the keys:
“-” to withdraw with the cursor on the character to modify
“+” to advance with the cursor on the character to modify
“back” or “forward” to modify the character
The movements are:
01 GRINDER the grinder produces a coffee dose by volumetric control.
02 GRINDER the grinder produces a coffee dose by time control.
03 ESPRESSO the coffee dose is released into the infusion chamber and the espresso supplying is executed.
04 SOLUBLE 1 The machine makes the soluble 1 (MILK) cycle with volumetric control (in cc).
05 TIME SOLUBLE 1 The machine makes the soluble 1 (MILK) cycle with time control (in secs).
06 SOLUBLE 2 The machine makes the soluble 2 (NOT PRESENT) cycle with volumetric control (in cc).
07 TIME SOLUBLE 2 The machine makes the soluble 2 (NOT PRESENT) cycle with time control (in cc).
08 HOT WATER a hot water quantity is supplied with volumetric control.
09 HOT WATER a hot water quantity is supplied with time control.
10 TIME PAUSE 1 a pause is executed
11 TIME PAUSE 2 a pause is executed
12 TIME PAUSE 3 a pause is executed
13 TIME PAUSE 4 a pause is executed
14 DECOUNTER 1 The decounter 1 is decreased by one unit (see also at page 21).
15 DECOUNTER 2 The decounter 2 is decreased by one unit (see also at page 21).
16 MILK MULTIPLA this function is not available.
17 VAPOUR MULTIPLA this function is not available.
18 GRINDER this function is not available.
Important: some movements could not work, depending on the model of the machine.
Consult the manufacturer in case you want to modify the sequence of movements.
Pag. 5
HOW TO GET THE MACHINE READY
• Open the door, fill the coffee bowl with coffee beans and close the door
• Connect the plug
• Keep pressed the “short espresso” button and switch on the machine with
the light switch located on the back side
• When the display will show “quick functions”, release the “short espresso”
button
• Press the “short espresso” button again to refill the water circuit and repeat
this procedure until the water comes out from the spouts
• Press “esc” button to go out of “quick functions”
• Wait some minutes for the heating and when the display will show
“INSERT THE CREDIT AND SELECT YOUR DRINK …” the machine
will be ready.
PAYMENT SYSTEM CONNECTION
• VALIDATOR 12V
switch off the machine and connect the 10 pins connector to the coin
mechanism. Then you can switch on the machine.
IMPORTANT: ANY OPERATION WITH THE COIN MECH
(DISCONNECTION OR CONNECTION) MUST BE DONE WITH THE MA-
CHINE OFF