Filter
Top Products
Pag. 8
SET DRINKS
Entering the program through Enter, you will see the sequence of the existing
drink codes.
The flashing cursor points out the drink code selected, to move it use the keys + to
advance or - to withdraw; contemporarily to the movement of the cursor, in the
underlying line, the name of the selection will be visualized related to the drink
code.
To modify the parameters of the drink code press Enter.
A sequence of numbers will be visualized that correspond to the doses of the se-
lection, the line price (P) and the menu of the name of the drink (MS).
As in precedence, the cursor points out the dosing code selected, therefore to
move it use the keys “up” or “down”-; on the underlying line the description of
the selected dosing will appear.
To modify its value, after having selected it, press E.
Use “-” or “+” to insert the desired value and to confirm press E. To exit of the
menu press “ESC”.
Press" -" to confirm the changes or" +" to cancel it.
01-02-03-04
Sel.1
03-P1-MS
ESPRESSO
ESPRESSO WATER
45
SAVE CHANGES ?
YES NO
Pag. 17
RESET COUNTERS&AMOUNTS: Reset of all the counters above. Press “6”
to confirm or “5” to cancel.
ENABLE TEMPERAT.ON DISPLAY: Visualization on display of the boiler
temperature.
SERIAL NUMBER: set the serial number of the machine.
CAUTION ! OUTPUT TEST !: test of all the electrical output of the electronic
board (see the chart at page 18).
TYPE OF MACHINE: set-up of the model of the machine.
DISPLAY COUNTERS ENABLE: if enabled, at the power-on the display will
show the total counter, which can’t be reset.
BOILER 1 WORKING: enable of the boiler 1.
Note 1: to avoid the blocks in the mixing group, the software controls the powder
and water values in the way explained in the diagram.