Filter
Top Products
Pag. 16
OPTIONS: LEVEL 2 (manager- technician)
After having inserted the correct password, that it initially is" ask 00070", you
will enter in the following menu:
MODIFY PASSWORD LEVEL 1: Insert the new password and press Enter to
confirm.
MODIFY PASSWORD LEVEL 2: Insert the new password and press Enter to
confirm.
SET DRINKS: See ”set drinks” chapter at page 19.
LOAD DEFAULT DATA: Original data loading. To confirm press “-” while to
cancel press “+”.
SET LANGUAGE: Language of all the message .
SET DELAY POWDER: Set the delay between the water and the powder, in
tenth of seconds (see note 1).
SET WATER QUEUE: Reserve of water without powder at the end of the selec-
tion, in tenth of seconds (see note 1).
SET PAUSE ESPRESSO GROUP: Time for coffee puck drying, in tenth of
seconds.
SET FILTER COUNTER: Counter for the limestone filter substitution. Once
reached, the machine will show “*” on display but it will continue to work (see
also at page 22).
SET NUMBER OF COFFEE GROUNDS: Counter for coffee pucks emptying.
Once reached, the machine will show “EMPTY GROUNDS” and it will stop (see
also at page 22).
REGULAR MODE COUNTERS&AMOUNTS: regular mode counter.
TEST MODE COUNTERS&AMOUNTS: test mode working counter.
FREE MODE COUNTERS&AMOUNTS: Free mode working counter.
Pag. 9
To modify the name of the drink use the keys:
" -" to withdraw with the cursor on the character
" +" to advance with the cursor on the character
"back" or "forward" to modify the character
Example: change the water quantity of the coffee for the selection " Es-
presso" (selection #2)
switch off the machine, keep pressed the “espresso” button and switch on the ma-
chine.
when the display will show “SET DRINKS” release the “espresso” button.
Press enter
move the cursor on the code 02 with the key “up”
Press enter
move the cursor on the movement 03 with “up”
press Enter
Press “+” or “-” to set the desired value and then press Enter to confirm it
press “esc” to go out of the sub-menu
press"-" to confirm the changes
press “esc” to go out of the menu "set drinks"
Press “esc” to go out of the programming
SET PRICES
In this menu it is possible to set the value of 10 prices lines , to which the various
selections are linked.
To select the price line to set, use the keys “up” or “down”, press enter to change
the value and set it pressing “+” or “-”, after that press Enter to confirm.
To go out of the programming, press “esc”.
Note: if all the price lines have the value 0, the machine will work in “test mode”,
showing it on the display.