Filter
Top Products
LDF9810ST DISHWASHER
LDF9810ST Page 30 DISHWASHER
SUMP ASSEMBLY
Remove the wiring connections,
including the ground wires attached
by screws.
Remove the hose connections.
Lift the sump assembly out of the base
of the dishwasher.
Remove the 2 screws and sump holder
clips. Be careful not to let the sump
assembly fall into the tub.
Press the hooks gently toward the
center of the sump assembly and lower
the sump assembly into the tub while
supporting it with one hand.
HEATER and DRAIN MOTOR
Loosen the nut on the heater retainer
to the end of the shaft and wiggle the
heater out of the sump.
Remove 3 screws and detach the drain
pump from the sump.
VARIO MOTOR
Remove 2 screws that attach the vario
motor to the sump.
Remove the vario motor and the micro
switch.