Filter
Top Products
TOOLS YOU MAY NEED
I c::::::::_j_ 10 mm 1
_[1/4 in 1/4 in
3/8 in 3/32 in
Hex Socket Wrench Phillips Screwdriver Flat Head Screwdriver Allen Wrench
NOTE: It is always recommended that the doors be removed when it is necessary to move the refrigerator through a
narrow opening. If it is necessary to remove the handles follow the directions below.
NOTE: Handle appearance may vary from illustrations on this page.
DOOR HANDLE REMOVING
1. Removing Refrigerator Handle
Loosen the set screws with the 3/32 " Allen wrench
and remove the handle.
* NOTE: If the handle mounting fasteners need to be
tightened or removed, usea 1/4 " Allen wrench.
DOOR HANDLE INSTALLATION
1. Reinstalling Refrigerator Handle
Place the handle on the door by aligning
handle footprints to fit mounting fasteners and
tighten the set screws with a 3/32 " Allen wrench.
NOTE: If the handle mounting fasteners need to be
tightened or removed, usea 1/4 " Allen wrench.
Mounting
Fasteners
Set Screw
Mounting
Fasteners
Allen Wrench
2. Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of
the handle with the 1/8" Allen wrench and remove the
handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1/4''Allenwrench.
2. Reinstalling Freezer Drawer Handle
Place the handle on the door by aligning
handle footprints to fit mounting fasteners and
tighten the set screws on the bottom of the
handle with a 1/8" Allen wrench.
NOTE: If the handle mounting fasteners need to be
tightened or removed, usea 1/4''Allenwrench.