Filter
Top Products
ENSURING PROPER AIR CIRCULATION
In order to obtain stable temperature, the air must flow
between the freezer and refrigerator sections. As shown
in the illustration below, the cold air enters through
the bottom part and circulates upward. This air returns
below the freezer floor and the rest of the air enters the
refrigerator section through the top vent.
MULTI FLOW
° The cooling fan operates more powerful and effective
than when in normal operation. This is especially
noticeable when new food is placed in the refrigerator
compartment.
• If the lining is damaged, water or other substances
could enter through the cool air vent causing
decreased efficiency.
Do not block any of these vents with packages of food.
This can interrupt the flow of air and cause temperature
and moisture problems.
IMPORTANT: Because air circulates between both
sections, any odors formed in one section will transfer
to the other. You must thoroughly clean both sections to
eliminate odors. To prevent odor transfer and drying out
of food, make sure you wrap or cover foods tightly (See
the "Food Storage Guide" section for details).
ICE PLUS
Press the button ICE PLUS. The LED light will turn on.
This function will remain activated for 24 hours and
intensify the cooling speed of the freezer and increase
ice production.
ENERGY SAVING MODE
NOTE: Energy-Saving Mode function is set from factory.
To activate or deactivate Energy-Saving Mode, open the
doors and then press the ENERGY SAVING button for
3 seconds.
This function is recommended for added energy savings.
(Some heaters to reduce excess moisture on the
refrigerator may be turned off)
The energy saving function is also recommended during
long periods of time spent away from home-like vacation.
CAUTION WHEN CLOSING THE DOOR
CAUTION
To reduce the risk of door scratches, please make
sure that the refrigerator door mullion is always folded
in.
If dew gathers on the refrigerator door mullion at any
point, deactivate the Energy Saving mode until the
issue resolves itself.
ADJUSTING THE CONTROLS
Your refrigerator has two controls that allow you to
regulate the temperature the freezer and refrigerator
compartments.
Initially set the REFRIGERATOR CONTROL at 37 °
degrees F and the FREEZER CONTROL at 0 ° degrees
R Leave them at these setting for 24 hours (one day) to
stabilize. Then adjust the compartment temperature as
illustrated above.
• Refrigerator Control: 32 °F to 47 °F (0 °C to 8 °C)
To adjust the temperature in the refrigerator compartment
open both doors, then press the REFRIGERATOR button
to cycle through the range of available settings.
DOOR ALARM
With this feature you will hear an alarm when the freezer
or refrigerator door is open for more than 1 minute.
These tones will repeat every 30 seconds. The alarm is
cancelled when the door is properly shut. To activate or
deactivate Door Alarm, press the button ALARM.
• Freezer Control: -6°F to 9 ° F ( - 21°C to -13°C)
To adjust the temperature in the freezer compartment
open both doors, then press the FREEZER button to
cycle through the the range of available settings.
• Temperature Display
To change the temperature display from Fahrenheit to
Celsius:
1. Simultaneously press and hold the FREEZER and
REFRIGERATOR buttons for more than 5 seconds.
2. Do the same to convert back to Fahrenheit.
15