Filter
Top Products
UNDERSTANDING YOUR MICROWAVE OVEN
9
INSTALLATION INSTRUCTIONS FOR GLASS TRAY
Figure 1 Figure 2-1 Figure 2-2
Figure 3
(the back of guide tray)
Figure 4-1 Figure 4-2
Figure 5 Figure 6 Figure 7
To Install:
1. Place the guide tray on the oven cavity bottom. The rollers on the shaft should fit inside the guide
tray bottom groove. (see figure 1, 2-1, 2-2)
2. Place the rotating ring on the guide tray. (see figure 3)
3. Place the glass tray on the rotating ring. Fit the rollers of the shaft between the raised, hollowed
groove of the glass tray bottom. The rollers on the rotating ring should fit inside the glass tray
bottom ridge. (see figure 4-1, 4-2)
USING OBLONG DISH
When using an oblong dish, don’t forget to place it in the center of the guide tray, or poor
performance will result.
An oblong dish which is smaller than 13 inches should be placed on the glass tray. A dish larger than
13 inches should be placed on the raised edge of the guide tray preventing it from touching the glass
tray.
Otherwise, poor performance will result. (see figure 6)