CAREANDcLEANING
REPLACING THE WATER FILTER
It is re_mmended that you replace the filter when
the water filter indicator reaches 0 or the water
dispenser or icemaker noticeably decreases
production.
_' ,,m
Rotate the knob of the old cartridge
counterclockwise. When the cartridge is
released, you will feel it click out of place.
NOTE: Replacing the filter Ruses a small
amount of water (around 1 oz. or 25 _) to
drain. Place a cup under the filter hole to
contain it.
Remove the old cartridge. Take the new
cartridge out of its packaging, and remove the
protective cover from the o-rings. Hold the
cartridge handle in its vertical position, and
firmly push the new filter cartridge into place
until it stops.
z .........
Use the handle to twist the cartridge
clockwise about one turn, until the handle is in
a horizontal position. You will feel the filter
click into place.
NOTE: If the filter will not turn from side to
side, it isn't fully inserted.
After replacing the filter, flush 2.5 gallons through
filter before use (flush for approximately 5 minutes).
Check the filter for leaks.
When the water filter indicator displays the
message 0 Filter Month, Hold 3 Seconds,
reset the water filter status display and indicator
light by pressing and holding the LIGHT/FILTER
button for more than 3 seconds.
To purchase replacement water filter cartridges,
visit your local appliance dealer or parts distributor.
You can also call 1-800-243-0000 (USA) 1-888o542-
2623 (Canada).
The replacement water filter cartridge's part
number is 5231JA2006A.