Filter
Top Products
How to Operate
- 15 -
NE-1037
C. Programming the Double Quantity Pad:
Your oven is preset at the factory to automatically double the programmed time for double quantity
heating.
This model allows you to customiz
e the heating time and/or power level for double quantity of your menu
items.
For example, if Memory Pad 2 is set for 20 seconds at 1000 W, 40 seconds at 1000 W is set for double
quantity heating automatically. However, if your own tests have determined that the correct heating time
required for two portions is less (only 30 seconds at 1000 W), you can program as shown below.
NOTE: • Program the remaining Memory Pads as desired by repeating steps 1 - 6 above.You may insert up
to 10 memory programs.
• When the Program indicator “ ” is blinking, the program can be cancelled and/or the pad number
erased by pressing the Stop/Reset Pad.
Example: To program 30 seconds at 1000 W on double quantity of Memory Pad 2 (display must be
blank)
1.
2
2.
3.
4.
• Press the Program Pad.
Note:
• If no “ ” Indicator appeared on
display, “Progam Lock” should be
cancelled. (See page 16)
• Press Double Quantity Pad.
• Press the Power Level Selector Pad
once. The Memory Pad number will go
out.
3
0
• Press Memory Pads 3 and 0.
5.
• Press the Program Pad again.You have
completed programming the selected
Memory Pad for double quantity heating.
• 2 seconds later, the display will confirm
your programming.
• 2 seconds later, the display will go blank.
• Press the Memory Pad 2.
The pad number and the previously
selected time and power level for double
quantity heating will briefly appear in the
display.
• The pad number and Stage Heating
Indicator will reappear in the display.
6.
X
2
x2
x2
1
x2
1
x2
1
x2
1
x2
1
x2
1
x2
1