Filter
Top Products
How to Operate
- 18 -
NE-1037
D. To Select Beep Tone Options:
The Beep Tone can be set, ON or OFF.
0
2.
3.
• Press the Program Pad. The display will
not change.
• Press the Memory Pad 0.
• Repeat pressing the Memory Pad 0.
Select “OFF” of Beep Tone.
Stage Indicator 1 = ON
Stage Indicator 2 = OFF
• Press the Program Pad again.You have
completed programming the beep tone.
• 2 seconds later, “0” will appear in the
display.
1.
Open the door.
5.
E. To Read the Cycle Counter:
The oven can display the total number of times the oven has been operated cumulatively. This may be
used to analyze usage of the oven and traffic flow at the location.
• While pressing Stop/Reset Pad, press
Power Level Pad. The display shows the
total cumulative number of times the
oven has been used.
Example:
• 9999 means the oven has been used
999900 - 999999 times.
• 0020 means the oven has been used
2000 - 2099 times.
• If the total cumulative number of
times is less than 100 times, the
display will not be changed.
• 2 seconds later, “0” will appear in the
display window.
1.
Open the door.
2.
+
0
1
2
2
4.