Filter
Top Products
16
Levelling the appliance
1. Adjust the height of the appliance at the front by twisting the
adjustable feet
1
(A/F 27).
Caution!
The front feet of the appliance must be firmly placed on the
floor.
2. Adjust the height of the appliance
at the rear by turning the adjusting
bars
2
(A/F 5).
Turn the adjusting bars clock-
wise until the compressor mount-
ing plate touches the anti-tipping
bracket.
Fastening the appliance in the recess
Once in the recess, secure the appliance to the body of the unit
using the securing plates (4 x 16 screws). Then click the covers
supplied into place.