Filter
Top Products
21
GB
* Depending on model and options
______________________________________________
All types and models are subject to continuous improve
ment and the manufacturer therefore reserves the right to
make modifications in the shape, equipment and technology.
[mm]
580
631
min. 50
ca. 36
min.
300 cm
2
U
56,5
[mm]
S
10
T
A
B
C
Ta
SW5
*
SW5
180°
1
2
4
5
7
9
9
8
8
8
8
9
13
15
I
II
20
20
21
21
10
15
13
7
25
25
25
20
Torx 25
14
*
18
*
16
*
17
Torx 15
H
597
631
614
644
1179
*
31
30
32
1
2
3
4
3
Insertion into row of kitchen units
Fig. U: The appliances can be installed in a row of kitchen
units. To adapt the height of the appliance to the sur-round-
ing furniture a top unit 1 can be added.
A gap of at least 50 mm depth must be provided behind and
along the entire width of this unit so as to ensure sufficient
ventilation. The area of ventilation underneath the ceiling
should be at least 300 cm
2
. The greater the area the more
economically the appliance will run.
W When installing with standard kitchen units (max. depth
580 mm) and decor panels of max. 2 mm thickness, the
appliance can be set up right next to the kitchen unit. The
door protrudes 34 mm from the side of the kitchen unit
and 51 mm at the front. This enables it to be opened and
closed without difficulty.
W When setting up the appliance next to a wall 4, a mini-
mum distance of 36 mm must be provided on the hinge
side between the appliance and the wall (for the handle
when the door is open).
1 top unit 3 kitchen unit side panel
2 refrigerator/freezer 4 wall
Notes on assembling decor panels*
(with white appliances of height H = 1841 mm)
Decor panel and frames can be attached to the door of
your appliance to match or contrast it to the existing kitchen
colour scheme.
The panels are available from your kitchen furniture supplier.
The frames can be fitted later and are available from your
dealer.
If you wish to fit the decor panels yourself, you will need a
drill or a rechargeable screwdriver to pre-drill the retaining
holes. The door handles are to be replaced by the rigid han-
dles included in the decor frame retrofit kit.
For further instructions and dimensions see the installation
instructions included in the retrofit kit.