Liebherr 7083 247-00 Appliance Trim Kit User Manual


 
20
Switching the temperature display between
control sensor and product sensor
Press for 5 seconds. Display=
Display= (control sensor)
Display= (product sensor)
If the product sensor is activated,
AUX appears in the display.
Display=
Press for 5 seconds.
The electronic control system will automatically switch back to
normal operating mode.
Calibrating the control sensor (standard sensor for
temperature control)
Possible tolerances of the control sensor (the displayed tempera-
turecomparedtotheactualinteriortemperature)canbeoset
with this function.
Press
for 5 seconds. Display=
Display=
Display=
Display=correctionvaluesetatthefactory
Use buttons
or to increase or decrease the correction value
in 0.1°C increments.
Display=actual(corrected)interiortemperature
Display=
Press for 5 seconds.
The electronic control system will automatically switch back to
normal operating mode.
Product sensor (available accessory)
The temperature may be measured or recorded at any point in the
interior using the product sensor.
•Connectsensor(seesectionentitledExternal alarm)
Activating the sensor
Press for 5 seconds. Display=
Display=
Display=
Display=
Display=
Press for 5 seconds.
The electronic control system will automatically switch back to
normal operating mode.
If
appears in the display, the product sensor has not
been activated.
If
appears in the display, the product sensor has not been
connected, or is faulty.
Calibrating the product sensor
Possible tolerances of the product sensor (the set temperature
comparedtotheactualinteriortemperature)canbeosetwith
this function.
Press
for 5 seconds. Display=
Display=
Display=
Display=
Display= .
Use buttons or to increase or decrease the correction value
in 0.1°C increments.
Display=actual(corrected)productsensortemperature
Press
for 5 seconds.
The electronic control system will automatically switch back to
normal operating mode.