Liebherr 7083 247-00 Appliance Trim Kit User Manual


  Open as PDF
of 13
 
21
GB
Changing the network address
When connecting several appliances via the RS485 interface,
each appliance must have its own network address.
Press
for 5 seconds. Display=
Display=
Display=
Display=
Display=
Use buttons or to change the network address ( - ).
Display=
Press for 5 seconds.
The electronic control system will automatically switch back to
normal operating mode.
Setting the real time clock
The real time clock is preset (CET). Other time zones or summer/
winter time must be adjusted manually.
Press
for5seconds.Display=
Display=
Display= Year 2012
Display= Set the year by pressing the buttons.
=savenewsetting
Display= Month (1-12)
Display= Set the month by pressing the
buttons.
=savenewsetting
Display= Day(1-31)
Display= Set the day by pressing the buttons.
=savenewsetting
Display=  Days of the week (1= Monday, 7=
Sunday)
Display= Set the day of the week by pressing the
buttons.
=savenewsetting
Display= Hour (0-23)
Display= Set the hour by pressing the
buttons.
=savenewsetting
Display= Minute (0-59)
Display= Set the minutes by pressing the
buttons.
=savenewsetting
Press
for 5 seconds.
The electronic control system will automatically switch back to
normal operating mode.
Note
When appears in the display, the real time clock must be
reset.
Resetting the parameters to factory settings
The alarm limits and sensor calibration values can be reset to
the factory settings using this function.
Pull out the mains plug.
Keep
pressed and connect the mains plug.
Display=
Display=
The electronic control system will automatically switch back to
normal operating mode.
 previous next