Filter
Top Products
4
Mounting the anti-tipping device
WARNING!
The supplied anti-tipping bracket must be installed in all
cases. This prevents the appliance from tipping over when
the fully loaded door is opened.
Installation:
1. Mark the centre line of the appliance on the floor.
Align the anti-tipping bracket centre to the centre line.
2. Depending on the constitution of the floor and wall, use any pos-
sible mounting option as shown in chapter Mounting Options.
The screws (6 x 60) are supplied with the accessory pack.
Important!
If the floor slopes down sideways, the anti-tipping
bracket must be fitted horizontally. Lay down spacers
in the appropriate positions.
CAUTION!
Ensure that there are no electric cables or water pipes in the
wall section to which the anti-tipping bracket is to be secured.
These could be damaged during installation.
Mounting options
Wall
Floor
Mounting the bracket with the wall studs.
Mounting with plugs to concrete walls.
3 Screws 6 x 60 mm
Wall
Floor
Mounting with the wall plate turning in
the screws at an angle.
3 Screws 6 x 60 mm
Wall
Floor
Mounting with wooden floors.
Mounting with plugs to concrete floors.
3 Screws 6 x 60 mm