Filter
Top Products
6
6. Route the mains cable towards the socket.
7. Route the water hose towards the water shut-off tap.
WARNING!
Do not connect the appliance to the power supply until the
installation is completed.
CAUTION!
Lay the mains cable and the water hose in such a way that
they will not be damaged when the appliance is slid into
the installation recess.
6.
7.
8. Push the appliance slowly into the recess until the compressor
mounting plate touches the anti-tipping bracket.
9. Fill the hose with water and connect to the shut-off tap.
Be sure the connection is tightly arranged.
Open the shut-off tap and check the system for leakage.
Important!
After the ice maker has been switched on, the water supply system
must be bled. See the section Bleeding the ice maker in the
operating instructions.
8.
5. Locate the water hose into the rail of
the appliance base.
5.