Filter
Top Products
8
BFI/BF1051 / BGEN/es 2956
A delight in freshness
INTEGRATING
CABINETRY
Framed Panels
- Figure 5
If the thickness of the custom panels is less than
1/4" (0.635 cm), they must be backed up with a
sheet of shim material to build the total thickness to
1/4" (0.635 cm). If the panel is thicker than 1/4"
(0.635 cm), an edge must be routed around the
panel to ensure a proper fit.
Figure 5
1/4"
22-11/16" (576 mm)
32-37/64" (828 mm)37-9/32" (947 mm)
1/4"
1/4"
1/4"
LBR02
3
IMPORTANT
If you are replacing the factory air vents with
an overlay, DO NOT restrict the air flow. The air
flow must be the same or greater than the
factory air vents of 31 square inches (200 cm
2
).
The door handles must be installed before the
screw covers are installed. If you fail to install
the handles before the screw covers, you can
damage the covers. The screw covers are
taped to the unit doors during shipping. Use
care when removing covers.
The door panel weight must not exceed
25 lb (11,3 kg).
BGEN_7082248_0929_Install_3Lang.qxd 10/21/2004 7:56 AM Page 8