Filter
Top Products
9
BFI/BF1051 / BGEN/es 2956
A delight in freshness
INTEGRATING
CABINETRY
Overlay Panels
- Figure 6
The overlay design line allows decorative panels to
cover the door trim for a more seamless
appearance that blends with the design of the
room. To achieve this look, the most common way
is to work with three panels, the decorative overlay
panel, a 0.10" (0.25 cm) spacer panel and a 1/4"
(0.635 cm) backer panel.
Depending on your cabinet manufacturer, this could
be one panel routed for different dimensions or,
more likely, three different panels.
IMPORTANT
If you are replacing the factory air vents with
an overlay, DO NOT restrict the air flow. The air
flow must be the same or greater than the
factory air vents of 31 square inches (200 cm
2
).
The door handles must be installed before the
screw covers are installed. If you fail to install
the handles before the screw covers, you can
damage the covers. The screw covers are
taped to the unit doors during shipping. Use
care when removing covers.
The door panel weight must not exceed
25 lb (11,3 kg).
Figure 6
Approx. 3/4"
(19.1mm)
0.1” (25.4mm)
1 Overlay Panel
1 Overlay
Panel
2 Spacer Panel
2 Spacer
Panel
3 Backer Panel
3 Backer
Panel
1/4” (6.4mm)
W
H
48”
Side-by-Side
W
23-5/16”
(592 mm)
21-3/4”
(553 mm)
33-5/8”
(854 mm)
37-9/32
(947 mm)
36-1/4”
(921 mm)
38”
(965 mm)
32-37/64”
(828 mm)
31-1/2”
(800 mm)
22-11/16”
(576 mm)
H - Refrigerator H - Freezer
W
Refrigerator
H
Refrigerator
H
Freezer
H
Freezer
=
=
=
=
=
=
=
3/8”
(9mm)
Handle Side
Hinge Side
3/8”
(9mm)
3/8”
(9 mm)
24”
Stand alone
=
=
=
=
=
=
=
=
=
=
=
=
3/8”
(9mm)
3/8”
(9mm)
LBR024
BGEN_7082248_0929_Install_3Lang.qxd 10/21/2004 7:56 AM Page 9