Liebherr CS1660 Refrigerator User Manual


  Open as PDF
of 80
 
14
Setup Mode - Figure 10
=Temperature display mode
Youcanchoosetheunit of temperatureforthe
displayindegreesFahrenheitordegreesCelsius.
Note
The factory setting is degrees Fahrenheit.
How to change the temperature display to
degrees Celsius
• Activatethesetupmodebytouchingthe
SuperFrosticonfor5seconds.
• Touchthefreezer compartmentDownicon
until
appearsinthefreezertemperaturedis-
play.
• TouchtheSuperFrosticon
-thedisplayshows
• TouchtheSuperFrosticonagain
-thetemperaturereadingisnowdisplayedin
degreeCelsius.
• Exitsetupmodebytouchingthefreezer
compartmentOn/Officon.
Note
To change the temperature display back to degrees
Fahrenheit, follow the steps above.
Figure 10
operaTion
=WaterquantityforIcecubetray
Iftheproducedicecubesoftheicemakeraretoo
small,theinflowingwaterquantitycanbeadjusted.
Howtoadjustthewaterquantity
• Activatethesetupmodebytouchingthe
SuperFrosticonfor5seconds.
• Touchthefreezer compartmentDownicon
until
appearsinthefreezertemperaturedis-
play.
• TouchtheSuperFrosticon
-thedisplayshows
• Touchfreezer compartment Upicon
onceonlyso
E4 appearsinthedisplay.
Do not increase for more than one step. If
the adjusted value is too high the ice cube
tray of the ice maker could overflow.
• TouchtheSuperFrosticonagain.
• Exitsetupmodebytouchingthefreezer
compartmentOn/Officon.
Checktheicecubesizewithinthenextdays.Ifthe
icecubesarestillsmallerasdesired,followthe
stepsaboveagain.
SuperFrosticon
FreezercompartmentUp/Downicons
FreezercompartmentOn/Officon
Freezertemperaturedisplay
ChildLockLED
 previous next