Filter
Top Products
13
HC 1001 / HC 1050
A delight in freshness
INSTALLATION
Installing Into a Kitchen Cabinet
Figure 14
All attachment components are provided.
CAUTION
To protect the appliance from possible
damage, allow the appliance to stand
30 minutes to 1 hour in place before
turning the electricity on. This allows the
refrigerant and system lubrication to reach
equilibrium.
1. Insert the equalizer trim (Fig. 15, 20) in the
slot so it is flush on the handle side and on
the edge of the appliance front. Secure to the
appliance with collar screws (Fig. 15, 21).
Figure 15
2.
Gently pry open the top bracket cover (Fig. 16, 1).
1
Figure 16
3. Position the power source cable so it can
be easily connected once the appliance is
installed. Use a piece of string to fish the cable
(Fig. 7, 1) if necessary.
7082132-02_KIKNv_USA.indd 137082132-02_KIKNv_USA.indd 13 2/28/2005 11:06:32 AM2/28/2005 11:06:32 AM