Filter
Top Products
17
HC 1001 / HC 1050
A delight in freshness
9. Cut sealing strip (Fig. 22, 25) to the length of
the recess on the handle side of appliance.
Press sealing strip into place between
appliance and kitchen cabinet wall on handle
side of appliance.
Figure 22
10. Reinstall middle bracket (Fig. 23, 15) to
appliance. Attach bracket to kitchen cabinet with
a screw (Fig. 23, 22). Snap cover into place.
Figure 23
11. Install top bracket (Fig. 24, 15) to kitchen
cabinet using two screws (Fig. 24, 22).
Snap cover into place.
Figure 24
12. Align the equalizer trim (Fig. 24, 20) so it is
parallel
with the bottom edge of the top wall of
the kitchen cabinet (it must not project beyond
this edge).
INSTALLATION
7082132-02_KIKNv_USA.indd 177082132-02_KIKNv_USA.indd 17 2/28/2005 2:03:34 PM2/28/2005 2:03:34 PM