Liebherr CI16 Refrigerator User Manual


 
OPERATION
7
CI 16/CS 16
Power Failure/Frost-Control
Display
- Figure 1
If appears in the display, this means the
freezer temperature has risen too high
during the last few hours or days due to a power
failure.
If you press the Alarm button (Fig. 1, 5) while the
display is reading, the highest temperature
registered during the power failure will be
displayed.
Check the quality of the food in case it has
become too warm or even defrosted.
The highest temperature will appear for
approximately one minute. After that, the actual
temperature in the freezer will reappear. The
display can be turned OFF by repeatedly
pressing the Alarm button.
Supercooling
- Figure 1
The Supercooling button switches the
refrigerator compartment to maximum
cooling. It is recommended particularly if
you wish to cool large quantities of food,
drinks, freshly baked goods or meals rapidly.
Turning ON: Press the Supercooling button
(Fig. 1, 10) briefly so the LED turns on. The
refrigerator temperature will drop to its lowest
value.
IMPORTANT
The Supercooling function uses slightly more
energy. After approximately six hours,
however, the refrigerator switches back
automatically to normal energy-saving
operation. If required, the Supercooling
function can be turned OFF sooner.
Turning OFF: Press the Supercooling button
again until the LED turns off.
CI_16_CS_16 Use Manual.qxd 1/12/2004 3:08 PM Page 7