Filter
Top Products
17
CI 16/CS 16
Customer Service
- Figure 1
If none of the above causes apply and you
cannot correct the fault yourself, or if the
temperature display reads
“
F1”
to
“F5”
, this
means there is a fault. Please contact your nearest
customer service department (see enclosed list for
addresses).
Give the fault number displayed, together with the
Type Designation (Fig. 1, 20),
Service Number (Fig. 1, 21) and
Appliance Number (Fig. 1, 22)
as given on the model plate, to ensure prompt,
accurate servicing. The model plate is located
inside the appliance on the left-hand side.
Leave the appliance closed until the customer
service engineer arrives to prevent any further cold
loss.
Appliance Information
Record this information when the appliance is
installed.
Type Designation: __________________________
Service Number: ___________________________
Appliance Number: _________________________
Date of Purchase: __________________________
Where Purchased:__________________________
CI_16_CS_16 Use Manual.qxd 1/12/2004 3:08 PM Page 17