16
CI 16/CS 16
Your appliance is designed and manufactured for a
long life and reliable operation.
If a problem occurs during operation, check
whether it is due to an operating error. Please note
that even during the warranty period, some repair
costs may be your responsibility.
You may be able to correct the following faults by
checking the possible causes yourself:
Problem Possible Cause and Remedy
- Is the appliance standing firmly on the floor, or does the compressor
cause nearby items of furniture or objects to vibrate? If necessary, move
the appliance slightly, align by adjusting the adjustable feet, or move
bottles and containers apart.
- Is the temperature setting correct? See Setting The Temperature.
- Has an excessive amount of fresh food been placed in the appliance?
- Does a separately installed thermometer show the correct reading?
- Is the ventilation system working properly?
- Is the appliance set up too close to a heat source?
- Is the refrigerator compartment turned ON?
- Has the door been open for more than 15 minutes?
- The bulb is defective. Change the bulb as described in Interior light.
- Is the appliance turned ON properly?
- Is the power source plug properly inserted in the socket?
- Is the circuit breaker or fuse in operating condition?
There has been a power failure; proceed as described in Power
Failure/Frost-Control Display.
Loud running noise
The interior light does
not come ON
Appliance does not work,
display is OFF
The temperature is
not cold enough
appears in the
display
- Is the ambient temperature too hot? See Safety Regulations.
- Has the appliance been opened too often or left open too long?
- A large amount of food has been added.
- Unit is in Supercooling mode. Verify unit is in normal operation mode.
Motor seems to
run too long
TROUBLESHOOTING
CI_16_CS_16 Use Manual.qxd 1/12/2004 3:08 PM Page 16