Manitowoc Ice QF0400 Ice Maker User Manual


 
Installation Instructions Section 2
2-12
Part Number 000002688
WATER SUPPLY AND DRAIN LINE SIZING/CONNECTIONS
Typical Water Supply Drain Installation
!
Caution
Plumbing must conform to state and local codes.
Location Water Temperature Water Pressure Ice Machine Fitting
Tubing Size Up to Ice
Machine Fitting
Ice Making
Water Inlet
45°F (6°C) Min.
90°F (32.2°C) Max.
20 psi (137.9 kPA) Min.
80 psi (551.5 kPA) Max.
3/8" Female
Pipe Thread
3/8" (9.5 mm) minimum
inside diameter
Condenser
Water Inlet
33°F (0.6°C) Min.
90°F (32.2°C) Max.
20 psi (137.9 kPA) Min.
150 psi (1034.2 kPA) Max.
1/2" Female
Pipe Thread
1/2" (12.7 mm) minimum
inside diameter
Condenser
Water Drain
--- ---
1/2" Female
Pipe Thread
1/2" (12.7 mm) minimum
inside diameter
Bin Drain --- ---
3/4" Female
Pipe Thread
3/4" (19.1 mm) minimum
inside diameter
Large Capacity
Bin Drain
--- ---
1” Female Pipe Thread
1” (25.4 mm) min. inside
diameter
SV1626
VENT TUBE
8” (20CM)
LONG
BIN DRAIN
ICE MAKING
WATER INLET
TUBING 3/8” MIN.
I.D. (.95 SM)
WATER
SHUT-OFF
VALVE