Filter
Top Products
4
Door Features
There are many different door features available for
your new unit. Full panel overlay doors and full wrap
painted and stainless doors are available. These doors
are fully reversible.
To Reverse the Door Swing of the
Full Panel Overlay and Full Wrap Doors
The door you relieved is for a right hand swing unit. If
the unit is to be changed to a left hand swing door, pre-
drilled striker plate holes are in place on the backside of
the door on both ends. No additional drilling is neces-
sary to mount the striker plate when you reverse the
door swing. Just unscrew the striker plate from the loca-
tion it is mounted to for right hand swing and then
mount the striker plate at the end opposite of its previ-
ous location with the existing screws.
If your door has an inner door liner with formed in
shelves, it will need to be turned around for use in the
left hand swing. Using a small, flat blade screwdriver,
pop the plastic screw covers up to access the phillips
screws that secure the formed door liner to the door.
Using a phillips screwdriver, remove the phillips screws
that secure the formed door liner to the door. Rotate the
formed door liner 180 degrees, line up the mounting
holes in the door liner with the mounting holes on the
door. Use the existing fasteners and plastic screw caps
to secure the formed door liner to the door. Your door
swing conversion is complete.
Door Handle
The full wrap painted and stainless doors come with a
standard, vertically oriented tubular-style door handle.
This door handle has the same finish as the door it is
mounted on.
The full panel overlay doors are designed to receive a
custom supplied panel. The customer will need to sup-
ply the door handle that will be mounted to the customer
supplied panel.