Filter
Top Products
5
CAUTION!
GROUND REQUIRED
FOR SAFE OPERATION
WARNING LABELS AND SAFETY INSTRUCTIONS
This symbol is the safety-alert symbol. When you see this symbol on your cabinet
or in this manual be alert to the potential for personal injury or damage to your
equipment.
Be sure you understand all safety messages and always follow recommended precautions and safe
operating practices.
NOTICE TO EMPLOYERS
You must make sure that everyone, who installs, uses or services your cabinet is thoroughly familiar
with all safety information and procedures.
Important safety information is presented in this section and throughout this section and throughout the
manual. The following signal words are used in the warnings and safety messages:
DANGER: Severe injury or death will
occur if you ignore the message.
WARNING: Severe injury or death can
occur if you ignore the message.
CAUTION: Minor injury or damage to your cabinet can occur if you ignore the message.
NOTICE: This is important installation, operation or service information. If you ignore the
message, you may damage your cabinet.
The warning and safety labels shown throughout this manual are placed on your Master-Bilt Products
cabinet at the factory. Follow all warning label instructions. If any warning or safety labels become
lost or damaged, call your customer service department at (800) 684-8988 for replacements.
This label is located on top of the electrical control
This label is attached to the cabinet power cord on models with a power cord
label and on the wiring channel. .