Filter
Top Products
SELECTING VENTILATION DIRECTION
After connecting power supply cord, you must select proper ventilation
direction. If your microwave oven has been installed for room venting, press
number 1. If your oven has been installed for roof or wall venting, press
number 2. This is to be sure that exhaust air is vented correctly,
Example: To set for room ventilation:
iStep Procedure KeypadI
I IPlug in. Press 1 to select room venting
1 Press Vent way
1 Room Venting
2 Roofor Wa Vent ng
;Press any key except 1 and 2 to
2 fix the room venting direction,
Example: 3
Note: • If you do not select a ventilation direction, you can not use the oven.
• When you reset the ventilation direction or after a power interruption,
unplug the oven from the AC outlet and plug it in again and then reset
the proper ventilation direction.
SETTING CLOCK
To set the correct time of day, follow the steps below.
Exam )le: To set 3:15:
Step i Procedure Keypad
Press Clock
1
Press 3¢ 1 and 5 to enter time of ___
2 day.
!Press Clock
3 The clock begins operation.
Note: • If the clock (or display) shows any abnormality, unplug the oven from
the AC outlet. Plug it in again and then reset the clock.
• When your oven is plugged in for the first time or after a power
interruption, reset the clock.
• This is a 12-hour clock.
• You can use the oven without setting the clock.
• The clock display can be turned off. See page 17 (Optional Settings) for
more details.
CHILD LOCK-OUT
The oven has a safety feature which prevents use by children. This feature
locks the operation of the oven until canceled.
To set:
;Step Procedure Keypad
Press START and hold for 4 seconds.
1 LOCK appears in the display.
To cancel:
iStep Procedure Keypad
Press START and hold for 4 seconds.
1 LOCK disappears from the display.
13