9
Turntable
Rotating
Ring
Hub
(Underside)
Turntable
Shaft
TURNTABLE
INSTALLATION
1. Place the rotating ring on the cavi-
ty bottom.
2. Place the turntable on top of the
rotating ring as shown in the dia-
gram. Make sure the turntable hub
is securely locked in the turntable
shaft.
• Never place the turntable upside
down. The turntable should never
be restricted.
• Both turntable and rotating ring
must always be used during cook-
ing.
• All food and containers of food are
always placed on the turntable for
cooking.
• The turntable rotates clockwise
and counter clockwise; this is nor-
mal.
• If turntable or rotating ring cracks
or breaks, contact your nearest
authorized service center for more
information regarding replace-
ment.
BUILT-IN INSTALLATION
• When installing a built-in oven, an
opening is required:
27” microwave oven:
25
1
⁄2 ±
1
⁄16”(W) x 22
1
⁄2 ±
1
⁄16” (H)
x 23
1
⁄2 min. (D)
30”microwave oven:
28
1
⁄2 ±
1
⁄16”(W) x 22
1
⁄2 ±
1
⁄16” (H)
x 23
1
⁄2 min. (D)
•Blocking the intake and/or outlet
opening can damage the oven.
• Plug oven into a standard 120-
Volt/60 Hz household outlet. Be
sure the electrical circuit is at least
15 amperes and that the
microwave is the only appliance
on the circuit.