Filter
Top Products
7
Oven Cooking
NOTE: The display will show 12:00 when the appliance is first connected to power or if power is interrupted. The Bake and Broil
indicators light when function is pressed.
Setting the Clock
1. Press the Clock pad.
• The clock time cannot be set if the control is pro-
grammed for a bake, broil or timing operation.
2. Set the correct time of day using the ▲ or ▼ pads. If the
▲ or ▼ pad is not pressed within 30 seconds, the program
will cancel. Press the Clock pad and begin again.
Setting the Timer
The timer can be set from one minute (:01) up to 99 hours
and 59 minutes (99:59). Time will be displayed in minutes and
not in seconds. THE TIMER DOES NOT CONTROL THE
OVEN.
1. Press the Timer pad.
• 0:00 will light and the colon (:) will flash in
the display.
2. Press the ▲ or ▼ pad until the desired time is
displayed.
• The timer will begin as soon as the time is set.
• The flashing colon indicates that a timing
operation is in progress. (The colon will not
flash if the time of day or oven temperature is
displayed.)
• Two short beeps signal the end of the operation. “0:00”
will appear in the display.
• If desired, press the Clock pad and the time of day will
briefly reappear in the display during a timing operation.
• If desired, press the Bake or Broil pads and the current
temperature setting will briefly reappear in the display
during a timing operation.
To cancel the timer operation:
Press and hold the Timer pad for several seconds.
Manual Clean Oven Control
(select models)
Using the Touchpads
• Press the desired pad.
• Press the ▲ or ▼ pad to enter time or temperature.
• A beep will sound each time a function pad is pressed. There
is no beep for the ▲ or ▼ pad.
• A double beep will sound if a programming error occurs.
A Bake Use for baking and roasting.
B Broil Use for broiling and top browning.
C Timer Sets timer.
D Clock Use to set time-of-day clock.
E CANCEL Cancels all operations except timer
and clock.
F ▲ or ▼ Enters or changes time, oven
temperature. Sets HI or LO broil.
Note: Four seconds after pressing the ▲ or ▼ pad, the
time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
and the ▲ or ▼ pad, the function will be canceled and the
display will return to the previous display.
A B C D E F