Supervisor’s Guide: Using Supervisor over the Web 45
Adding to a group
Adding to a group
Using Supervisor over the Web, you can use Add to group to add a user to a
group if:
• the group or user is within your scope
• the instance is not your own
• you are trying to add a user that is not a General Supervisor
For information on adding more than one user from a group at a time, refer to
Adding multiple users to a group on page 63.
To add a user to a group:
1. In the User Management pane for the current user, click Add to group.
The Add user “<user name>” to group pane appears.
2. From the Select a group list, select the group to which you want to add the
user.
3. Select a profile from the Select profile list.
If the Set Profile security command is disabled for your profile, you can only
assign the User profile.
The General Supervisor profile is not available for this action. This profile can
only be assigned to a user who has only one instance and is at the repository
root level.
4. Click OK to add the user to the group and return to the User Management
pane, or Close to cancel the operation and return to the User Management
pane.
ewwebsup60.book Page 45 Tuesday, July 6, 2004 5:34 PM
