Filter
Top Products
Supervisor’s Guide: Using Supervisor over the Web 61
Editing multiple user properties
Editing multiple user properties
After selecting multiple users in the Users in group section of the Group
Management pane, you can edit their properties.
1. In the Users in group section of the Group Management pane, select the
users whose properties you want to edit.
For information on selecting users, see Selecting users on page 59.
2. Click Edit.
The Edit selected users pane appears with a list of the selected users at the
top. By default, the settings are set to <Unchanged>. Descriptions of the
Password & Security settings are available in Editing user properties on
page 46. You need to leave the status as <Unchanged> for any parameters
that you do not want to change.
3. Select the actions that you want to perform on the selected users:
- To change the profile, select a profile that will be applied to the selected
users in the current group from the Profile list.
If the Set Profile security command is disabled for your profile, you can only
assign the User profile.
You cannot assign the General Supervisor profile unless you are logged in
as a General Supervisor and the users are in the repository root group.
ewwebsup60.book Page 61 Tuesday, July 6, 2004 5:34 PM