Filter
Top Products
^
Unscrew ball joint b using a spanner
and remove soft-close mechanism c
together with the ball joint.
Do not separate the soft-close
mechanism from the ball joint. This
would damage the mechanism.
^
Stand the appliance door up, and
slacken the hinges at the front (the
hinges remain open).
^
Remove screws a, and place the
stoppers supplied c in the empty
holes.
Do not close up the hinges. Danger
of injury.
^
Replace the hinges in their diagonally
opposite corners b.
^
Use a powered screwdriver to secure
the hinges; screws a are
self-tapping.
To secure the soft-close mechanism
^
Place the door with the outer side
downwards on a stable surface.
^ Screw ball joints b of soft-close
mechanism c into the new fixing
holes.
^ Open out soft-close mechanism c,
and hook mounting a onto the hinge.
^ Hold the soft-close mechanism in this
position, and screw mounting a to
the hinge.
Changing the door hinging
37