Filter
Top Products
^ Hang the furniture door onto
adjusting bolts a.
^ Loosely attach the nuts b on the
adjusting bolts.
^ Close the door and check the
distance between the door and
neighbouring furniture doors.
^ Align to match neigbouring doors if
necessary:
Side adjustments "X" are made by
sliding the furniture door, and height
adjustments "Y" by turning the
adjusting bolts a with a screwdriver.
^
Tighten nuts b.
Securing the appliance door to the
furniture door:
^ Screw fixing bracket a into the
pre-drilled holes in the appliance
door using hexagonal screw b.
Make sure the two metal edges c
are aligned (Symbol
II
).
^ Drill fixing holes d, and screw in the
4 x 14 mm screws e.
(On large or divided doors, attach a
second pair of fixing brackets a in the
handle region of the door. Use the
pre-drilled holes in the appliance door.)
–
Align depth "Z" on the furniture door:
Loosen screws f at the top of the
appliance door, and loosen the
hexagon-headed screw g at the
bottom of the fixing bracket. By
moving the furniture door, create a
gap of 2 mm between the furniture
door and the front edge of the niche.
Building in the appliance
42