Filter
Top Products
Switching on
^
Make sure the spray arms are not
obstructed.
^
Close the door.
^
Open the stopcock, if it is closed.
^
Switch the dishwasher on using the
On/Off button K.
The Start/Stop indicator light will flash
and one of the programme indicator
lights will come on.
Selecting a programme
Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
chart later on in this booklet.
^ Select the programme required with
the programme selector button.
The indicator light for the programme
selected comes on.
The programme duration will appear in
hours and minutes in the display.
You can now select additional
functions (see "Additional functions").
Starting the programme
^
Press the Start/Stop button.
The programme will begin. The
indicator lights for Start/Stop,
Wash/Rinse and the programme
selected will light up.
If any additional functions have been
selected, the relevant indicator light(s)
will also come on.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
Operation
35