Filter
Top Products
Regulating
The inner and outer burners of the
double-insert super burner are both
controlled by one control knob. There is
a stop at the 6 o’clock position that
requires you to press the knob down
while turning it in order to get from the
high flame to the low flame zone.
^
To reduce the flames from a high to a
low setting, turn the burner control
knob counterclockwise until
resistance is felt. Press the knob
down until you pass the stop, and
release the pressure and set the
cooktop the desired setting.
^ To increase the flames from a low to
a high setting, turn the burner control
knob clockwise until resistance is felt.
Press the knob down until you pass
the stop, and release the pressure
and set the cooktop the desired
setting.
The flame should be regulated so that it
never protrudes beyond the pot. Since
the outer part of the gas flame is much
hotter than the center of the flame, the
flame tips should remain under the
base of the pot. Protruding flame tips
give off unnecessary heat into the air
and can damage pot handles and
increase the risk of burning.
The burner can be continuously
regulated between the highest and
lowest flame. Exception: double-insert
super burner.
Turning off
^ Turn the burner control knob
clockwise to "ß".
The gas supply is stopped and the
flame goes out.
Do not turn the burner control knob
clockwise beyond "ß".
Using the cooktop
14