Filter
Top Products
Cleaning Tips
Stainless steel
Clean with a sponge and a mild solution of
liquid dish soap and warm water.
If necessary, use the rough side of the sponge
and the Miele Ceramic and stainless steel
cleaner. Make sure to only use the product in
the direction of the grain.
To keep the surfaces from quickly becoming
soiled again, we recommend treatment with
the Miele stainless steel care product. Using a
soft cloth, apply the product in a thin, even
layer.
Printed surfaces
(flame symbols)
Remove any soiling which
comes into contact with the
printed flame symbols and
the Miele logo right away.
Soiling, particularly salty food
or liquid and olive oil, can
cause damage if left on the
printed surfaces for too long.
Do not use stainless steel
cleaning agents on the
printed surfaces. This can rub
off the print.
Grates
Take off the grates.
Clean in the dishwasher or with a sponge and
a mild solution of liquid dish soap and warm
water.
If necessary, use the rough side of the
sponge.
Lighter spots on the grates
may be caused from soap
residue or from the rubbing of
pot or pan bottoms.
Clean as indicated in the
adjacent column.
Burner control
knobs
Clean with a sponge and a mild solution of
liquid dish soap and warm water.
Not dishwasher-safe.
Burner caps
Clean with a sponge cloth, a mild solution of
liquid dish soap and warm water.
If necessary, use the rough side of the sponge
Not dishwasher-safe.
Burner head
Clean with a sponge and a mild solution of
liquid dish soap and warm water.
If necessary, use the rough side of the sponge
Not dishwasher-safe.
Make sure that the flame
openings are completely dry
after cleaning.
Ignitor
Ignition safety
control
Wipe carefully with a damp cloth. Do not allow the Ignitior to
get wet, otherwise it will not
spark.
Cleaning and care
19