Filter
Top Products
Granite and marble countertops
a Countertop
b Cooktop
c Gap
As the ceramic glass and the
countertop cut-out have a certain
dimensional tolerances, the size of
gap c can vary.
^
Make the countertop cut-out as
shown in "Installation dimensions".
Remember to maintain the minimum
safety distances (see "IMPORTANT
INSTALLATION SAFETY
INSTRUCTIONS").
^
Feed the power cord down through
the cut-out.
^
Center the cooktop b in the cut-out.
^
Connect the cooktop to the mains
(see "Electrical connection").
^
Connect the appliance to the gas
supply (see "Gas connection").
^ Secure the appliance at the back and
front using the brackets supplied.
See "Securing the appliance".
^ Check that the cooktop works.
^ Seal the remaining gap c with a
silicone sealant that is heat-resistant
to at least 320 °F (160 °C).
For granite and marble countertops,
only use silicone sealant that is
especially formulated for granite and
marble, and observe the sealant
manufacturer's instructions.
Installation
31