Filter
Top Products
Cleaning and care
28
After cleaning
Aft
er cleaning, leave the filters on an
absorbent surface to dry.
When r
emoving the panels and
grease filters for cleaning, also clean
off any accessible oil or grease
buildup from the housing. Doing so
will prevent a fire hazard.
Rein
stall the grease filters. When
inserting the filters, make sure that
the locking clip is facing down.
If the filt
ers have been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.
Ho
ok the panels onto the support
rod.
Lift up the fr
ont of the panels and
push them into the lock until they
engage.
Resetting the filter saturation
count
er for the grease filters
Once cleaning is complete, the filter
satur
ation counter must be reset.
While
the fan is turned on, press the
filter saturation indicator for
approx. 3 seconds until 1 is the only
indicator flashing.
The grease filter symbol goes out.
When cleaning the grease filters before
the full oper
ating time has elapsed:
P
ress the filter saturation indicator
for approx. 6 seconds until 1 is
the only indicator flashing.