Filter
Top Products
Activating Con@ctivity 2.0
42
The Con@ctivity 2.0 function is now
r
eady for use.
If you do not confirm within 4 minutes,
activation will be canceled.
Checking activation
To check whether Con@ctivity 2.0 has
been acti
vated for the hood:
T
urn off the fan and cooktop lighting.
P
ress the Delayed shut down button
515 for approx. 10 seconds until
the 1 indicator appears in the fan
level display.
The
n, press the following buttons in
order:
– The "" butt
on
– Followed by the "" b
utton
– And then the lighting button .
If Con@ctivity 2.0 has been activated,
the indica
tors for levels 2 and 3 will be
constantly lit.
If Con@ctivity 2.0 has not been
activat
ed, the indicators for levels 2 and
3 will flash simultaneously.
T
o exit the check, press the Delayed
shut down button 515. All
indicators will go out.
T
o check whether activation has
taken place on the cooktop, please
refer to corresponding operating
instructions.
If a connection cannot be established
despit
e activation of the Con@ctivity
function on the hood and the
cooktop, the function must first be
deactivated and then reactivated on
both appliances.
Deactivating Con@ctivity 2.0
Deac
tivation on the hood is similar to
the activation procedure. Select the
"" button instead of the "" button.
To deactivate the cooktop, please
refer to the corresponding operating
instructions.
Please keep in mind that disabling the
connection will also disable any
r
emote control function being used.
The remote control must then be
reactivated.