Filter
Top Products
Installation
33
a
3 protective installation sheets
for use when installing the chimney
b
1 exhaust connector
for an exhaust duct 6" (150 mm).
c
1 reducer
for an exhaust duct 5" (125 mm).
d
1 non-return flap
for installation in the outlet duct
collar of the motor unit (not for
recirculation mode). Depending on
the device version, the non-return
flap is already mounted.
e
Telescopic wall bracket
for securing the ventilation hood on
the wall.
f
Recirculation kit for recirculation
mode
contains diverter, aluminum hose
and hose clamps (only for
D
A 6596 W, not contained in scope
of delivery, available as optional
accessory – see "Technical Data").
6 screws ³/₁₆" x 2 ³/₈" (5 x 60 mm)
and
6 plugs ⁵/₁₆" x 2" (8 x 50 mm)
for attaching to the wall. (Plugs not for
use in UDS / CDN.)
The screws and plugs are designed
for use in
solid walls only.
Use different fasteners for other wall
construction types.
Make sure that the wall can support
the load.
2 x M 6 locknuts
for mounting the appliance unit.
2 screws ¹/₈" x ⁵/₁₆" (3.9 x 7.5 mm)
for attaching the chimney.
1 lever
for disassembling the chimney.
Montage
Installation
Montaje
Montaggio
Montering
Montagem
Asennus
Installation sheet