Filter
Top Products
Frequently Asked Questions
53
Water intake fault
Problem Possible cause and solution
The dishwasher stop‐
ped working
shortly af‐
ter the program started.
The warning buzzer is
sounding.
The Intake/Drain indica‐
tor light is flashing on
and off.
The water supply is turned off.
T
urn on the water supply all the way.
The dishwasher stops
during a program.
The warning buzzer is
sounding.
The Intake/Drain indica‐
tor light flashes.
Fault code or ap‐
pears in the time dis‐
play.
Before fixing the fault:
T
urn the dishwasher off with the button.
There is a problem with the water intake.
T
urn on the water supply fully and start the pro‐
gram again.
Clean
the water intake filter (see "Frequently asked
questions").
The wat
er pressure at the intake is lower than 4.35
psi.
Contact a plumber.