Filter
Top Products
21
EN
12/ CLEANING YOUR APPLIANCE
Fig. 15
The filtration system consists of several
elements:
--
The waste filter
--
The large main filter
--
The micro filter
The filters are located in the centre of the tub
and must be washed regularly to obtain opti-
mum washing results.
Actions :
➀➀
Before removing the filters, remove any
waste on the large main filter with a
sponge so that the waste does not block the
sprinkler arms. Rotate the spray arm as
shown in the drawing. (Fig. 14)
➁➁
Loosen the waste filter a quarter of a turn
and then remove it
③③
Remove the main filter
④④
Remove the micro filter
⑤⑤
Carefully clean filters
,
and
under running water (Fig. 15)
Re-installation:
Proceed in reverse order, inserting filters
and and then
Important :
Remember to lock the waste filter
in place by pushing it in fully and turning it a
quarter turn.
AA
AABB
CC
CCBBAA
CC
BB
AA
BB
CC
BB
AA
• CLEANING THE WASTE FILTERS
Fig. 14
AA
BB
CC
➁➁
③③
④④
⑤⑤
20
EN
11/ PROGRAMMING
Advice :
Consult the Programmes table on the preceding pages to determine the programme you
need for the type of items, the quantity and the amount of food residue.
End of programme
Remaining time
Programme length
Waiting for delayed start
AA
CC
BB
➀➀
AA BB CC
45°C
70°C 65°C 55°C 45°C
BLANCO
Fig. 02
AA DD EE FF
CC
BB
• Immediate programme start
Press “
OOnn
/Off” , to switch on your appliance
and select your programme by pressing one
button or the other or the Automatic
programme by pressing the “AUTO” button.
— When a programme is selected, the associa-
ted light illuminates.
Press “Start/C” , the “In progress”
light illuminates. Close the door and the pro-
gramme starts.
A short audible signal (beep) confirm the but-
ton’s selection, except for the “On/Off” button.
• Delayed programme start
Delay your programme by 1 to 12 hours by
keeping on briefly pressing, or holding down,
the “Delayed Start”
button, as you prefer.
Confirm by pressing “Start/C”.
The screen counts down the hours until the
programme starts.
• Cancelling a programme
Hold down the “Start/
CC
” button for a few
seconds.
• Stopping the appliance
When the programme has finished, press the
“On/Off” button .
AA
FF
EE
FF
AA