Filter
Top Products
29
EN
28
EN
15/
INDICATIONS FOR THE TESTING LABORATORIES EN
14/
AFTER-SALES SERVICE
Fig. 16
••
INTERVENTION WORK
Any intervention work on your appliance must
be performed by a qualified professional
approved by the manufacturer. When you call,
please mention the full reference for your
appliance (model, type and serial number).
This information is shown on the description
plate (see Fig. 16)
ORIGINAL PARTS
When maintenance is being carried out, ask
for only certified original spare parts to be
used.
ENERGY EFFICIENCY TESTS ACCORDING TO AS/NZS 2007 PROGRAMME : Normal Eco
— Washing capacity - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 standard place settings
— Arrangement of the items - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Figs. A-B-C;
IIEECC
load (next
page)
— Loading as per the indications on next page, with one or two side
shelves, without stemmed glass support, and with 5 cup/saucer
supports (4 for 13 saucers & 1 for 2 cups)
NO
— Setting for upper basket - - - - - - - - - - - - - - - - - - - - - - - - - - - - Low position
— Dosage of detergent - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 + 26.25 g of detergent
— Setting for rinsing product distributor - - - - - - - - - - - - - - - - - - 3
— The water softener must be set to 0-10°F
instructions in the paragraph on “Adjusting the water softener”.
— Door ajar 100 mm upon completion of dry test.
For more information on the comparison tests in accordance with AS/NZS 2007, please contact
the manufacturer of the machine before commencing testing.
NNBB::
When conducting tests using a multi-function tablet:
- Check that the water softener is correctly set for the water hardness (Chapter 5 / DETERGENT
PRODUCTS AND ADJUSTING THE WATER SOFTENER • FOR MULTI-FUNCTION PRODUCTS)
- Pull out the detergent distribution drawer and place the tablet in the interior compartment.
45°C