Before using the coffee system
for the first time
1. Clean the parts
^
Hand wash the coffee capsule plate
with hot water and liquid dish soap.
^
The water tank can be washed in the
dishwasher.
2. Fill the water tank
^
Open the appliance door.
^
Lift the water tank and pull it out.
^ Fill the container with fresh, cold tap
water to the "Max." mark. Push the
water tank back into the machine.
3. Fill the system with water
HOT WATER
K12345 L
o
n
G
k C
^ Set a cup under the steam valve.
^
Turn the left jog shuttle to "Hot water".
^
Press the right jog shuttle.
The steam valve dispenses hot water.
^
Press the right jog shuttle again to
turn the hot water off.
^
Turn the left jog shuttle to "Heating
with steam".
^
Press the steam lever down.
^
Push the steam lever up when steam
starts to be dispensed.
The lines are filled and the coffee
system is ready to use.
4. Rinse the lines
RINSE
K12345L on
G
k C
^
Turn the left jog shuttle to "Rinse".
^
Press the right jog shuttle.
Water runs from the coffee dispenser.
^
Press the steam lever down.
Water runs from the steam valve.
^
Push the steam lever up after a few
seconds.
First steps to use
12