a Telescopic extension piece
b Tower
c Canopy
d Control panel
e Grease filters
f Recirculation grilles
(only for recirculation mode)
g Glass edge feature lighting
h Hob lighting
i Charcoal filter
(special accessory for recirculation
mode)
j Touch control for
glass edge feature lighting
k Touch control for the
hob lighting
This control switches the lighting on
and off, and is also a dimmer switch.
l Touch control for the fan
m Touch controls to select the
fan power level
n Touch control for the run-on
option
To activate the run-on option. The fan
can be set to switch off automatically
after either 5 or 15 minutes.
o Touch control for the grease filters
The indicator lamp for the grease filters
lights up when the grease filters need
to be cleaned.
The touch control is used to reset the
operating hours counter every time the
grease filters are cleaned (see
"Cleaning and care").
It can also be used to check and alter
the operating hours counter.
p Touch control for the charcoal
filter
The indicator lamp for the charcoal filter
lights up when the charcoal filter used
in recirculation mode needs to be
replaced. For this to happen, the
operating hours counter needs to be
activated before the appliance is used
for the first time.
The touch control is used to reset the
operating hours counter every time the
charcoal filter is replaced (see
"Cleaning and care").
It can also be used to check and alter
the operating hours counter.
For information about using the
appliance, see "Operation".
Guide to the appliance
13