Filter
Top Products
Changing a halogen lamp
^
Before any cleaning or maintenance
work, disconnect the cooker hood
from the mains supply. Ensure that–
–
it is switched off at the wall socket
and the plug removed, or–
–
it is switched off at the isolator, or-
–
the screw-out fuse is removed (in
countries where this is applicable).
,
Exercise caution when changing
halogen lamps. They get very hot
during use and remain hot for some
time after being switched off. Let
them cool down before you change
them.
Do not touch the surface directly
when changing a lamp, as grease
particles from your fingers will
adhere to the surface and damage
it. Please follow the manufacturer's
instructions.
^ To access the halogen lamp, push
the lamp cover gently upwards. The
cover will open and can be pulled
down.
^
Pull the old halogen lamp out of the
connection socket and replace it with
a new one (20 W, G 4 fitting).
^
Push the cover back up and make
sure it clicks into place.
Cleaning and care
27