Miele dishwashers Dishwasher User Manual


 
Drying fan running time
During the drying phase, as long as the
door of the dishwasher remains closed,
moist air is expelled through the ventila
-
tion outlet for the drying fan. The drying
fan running time can be increased to
avoid the risk of damage to a worktop
fitted above the dishwasher. If this op
-
tion is selected, the fan will continue to
run for approx. 14 minutes after the end
of a programme.
Activating and deactivating in
-
creased drying fan running time:
^ Switch the dishwasher off using the
"On/Off" button.
^ Turn the programme selector to the
"Stop" position.
^ Press $ and “Start” in and whilst do-
ing so switch the dishwasher on us-
ing the “On/Off” button. Then release
these buttons.
A P and two numbers will appear in the
time display.
The "Salt" indicator light will flash.
If this is not the case the process must
be repeated.
^
Turn the programme selector to the "9
o’clock" position.
The following values will show in the
display:
90: the fan running time is not in
-
creased,
91: The fan running time is increased
^
Press the “Top Solo” button to
change the setting.
The value in the display will change ac
-
cordingly.
^
Turn the programme selector to the
"Stop" position.
A P and 2 figures will appear in the time
display.
^ Press the “Start” button.
SP for save will appear in the time dis-
play.
^ Press the “Start” button again.
The fan running time change is now
stored in memory.
The “Start” indicator light will flash.
^
Switch the dishwasher off using the
"On/Off" button.
Operation
40